K 2500 Yukon 4WD V8-6.0L VIN U (2000)
17. Install the headlamp housing support (1) to the radiator support (2). The 15 series lower mounting position is shown. The 25 series mounting
position is similar.
Tighten the screws to 9 N.m (80 lb in).
18. Install the hood latch release bracket and cable.
19. Install the park/turn signal lamp assemblies.
20. Install the headlamps.
21. Install the inflatable restraint front end discriminating sensor.
22. Install the front bumper.
23. Install the grille.
24. Install the air intake duct. Refer to the appropriate procedure:
*
Air Cleaner Assembly Replacement in Computers and Control Systems - 4.3L
*
Air Cleaner Assembly Replacement in Computers and Control Systems - 4.8L, 5.3L and 6.3L
25. Enable the SIR. Refer to Enabling the SIR System in Restraint Systems.
26. Connect the negative battery cable. Perform the Idle Learn Procedure for 4.8L, 5.3L, and 6.0L engines only.
