K 2500 Yukon 4WD V8-6.0L VIN U (2000)
6. Remove the weatherstrip from the door.
Installation Procedure
1. Install the weatherstrip to the following locations:
*
The front of the glass run channel
*
The top of the window frame flange
*
The rear of the glass run channel
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts.
Tighten to 6 N.m (53 lb in).
3. Install the window.
4. Install the water deflector.
5. Install the door trim panel.
6. Inspect operation of window.
Front Side Door Window Belt Outer Sealing Strip Replacement (Front)
Front Side Door Window Belt Outer Sealing Strip Replacement (Front)
Removal Procedure
Important: The outer belt sealing strip seals between the inner and outer door panels and the window at the belt line. The outer sealing
strip is replaceable. Do not remove the inner sealing strip, because the strip is attached to the glass run channel.
1. Remove the outside mirror.
2. Remove the outer sealing strip from the door, lifting up on the forward end in order to unhook the rear of the strip from the window run channel.
Installation Procedure
