K 2500 Yukon 4WD V8-6.0L VIN U (2000)
6. Install the rotor. Refer to Brake Rotor Replacement.
7. Install the park brake cable to the mounting bracket until the locking tabs snap into place.
8. Install the park brake cable to the lever.
9. Tighten the nut to the intermediate cable at the equalizer.
^
Tighten the nut to 3.5 N.m (31 lb in).
10. Install the caliper and mounting bracket as an assembly. Refer to Brake Pads Replacement.
11. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
12. Remove the safety stands.
13. Lower vehicle.
14. Adjust park brake cable. Refer to Park Brake Lever Adjustment.
