K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement-Intermediate
Removal Procedure
1. Release the parking brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the nut from the threaded end of the intermediate cable.
4. Disconnect the equalizer from the rear park brake cables.
5. Disconnect the intermediate cable from the front cable.
6. Remove the intermediate cable.
Installation Procedure
1. Install the intermediate cable.
2. Connect the intermediate cable to the front cable.
3. Connect the equalizer to the rear park brake cables.
Notice: Refer to Fastener Notice in Service Precautions.
