K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Parking Brake Lever: Adjustments
Important: Before you adjust the park brake, verify that the park brake shoes are adjusted to provide a clearance of 0.6604 mm (0.026 inch).
1. Verify that the self adjuster lock-out pin has been removed, located in parking brake pedal assembly, no image location provided.
(Editor's note: If there is no self-adjuster lockout pin found, as a possible alternative procedure, please refer to Disabling/Enabling the Park Brake
Cable Automatic Adjuster procedure under Parking Brake Cable Adjustments.) See: Parking Brake Cable/Adjustments
2. Fully apply and release the park brake lever 3 times.
