K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Oil Filter: Service and Repair
Removal Procedure
1. Open the hood.
2. Raise the vehicle and support with safety stands. Refer to Vehicle Lifting.
3. Remove the oil filter from the engine block.
4. Remove the oil pan drain plug and drain the engine oil into a suitable container.
Installation Procedure
1. Lubricate the oil filter seal with clean engine oil.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the oil filter to the engine block.
Tighten the oil filter to 30 N.m (22 lb ft).
