K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Front Crankshaft Seal: Service and Repair
^
Tools Required
-
J41478 Crankshaft Front Oil Seal Installer
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement.
3. Remove the crankshaft front oil seal.
Installation Procedure
1. Install the crankshaft front oil seal. Refer to Crankshaft Front Cover Oil Seal Installation.
2. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement.
3. Connect the negative battery cable.
