K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Air Duct: Service and Repair
Air Distribution Duct Replacement
AIR DISTRIBUTOR DUCT REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel (IP) carrier from the vehicle.
2. Remove the air distribution duct retaining screws.
3. Remove the air distribution duct.
INSTALLATION PROCEDURE
1. Install the air distribution duct.
2. Install the air distribution duct retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Tighten the screws until the screws make full contact.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
4. Install the IP carrier to the vehicle.
Upper
REMOVAL PROCEDURE
