K 2500 Yukon 4WD V8-6.0L VIN U (2000)
1. Install the air outlet.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the air outlet mounting screw.
Tighten
Tighten the screw to 1.6 N.m (14 lb in).
3. Install the instrument panel (IP) bezel.
Left Side
REMOVAL PROCEDURE
1. Remove the instrument panel (IP) bezel.
2. Remove the air outlet housing from the IP carrier.
3. Disconnect the electrical connections as necessary.
4. Remove the air outlet housing.
5. Remove the air outlet from the housing assembly.
6. Transfer the switch assemblies as necessary.
INSTALLATION PROCEDURE