K 2500 Yukon 4WD V8-6.0L VIN U (2000)
1. Remove the Rear Quarter Trim Panel.
2. Remove the rear lower duct air temperature sensor - auxiliary (10) and wiring harness assembly from the air distributor duct (7).
3. Disconnect the electrical connector from the rear lower duct air temperature sensor - auxiliary.
INSTALLATION PROCEDURE
1. Connect the rear lower duct air temperature sensor - auxiliary (10) to the electrical connector.
2. Install the rear lower duct air temperature sensor - auxiliary and wiring harness assembly to the air distributor duct (7).
3. Install the Rear Quarter Trim Panel.