K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Alignment: Service and Repair
Measuring Wheel Alignment
Satisfactory vehicle operation may occur over a wide range of alignment settings. Perform preliminary inspections prior to measuring alignment angles
or inaccurate readings may result.
Perform the following steps to measure the front alignment angles:
-
Install the alignment equipment according to the manufacturer's instructions.
-
Jounce the front bumpers lightly 3 times and jounce the rear bumpers lightly 3 times to normalize the suspension prior to measuring the angles.
-
Measure the alignment angles.
-
Record the readings. If adjustments are required, make them in the following order:
1. The caster
2. The camber
3. The toe