K 2500 Yukon 4WD V8-6.0L VIN U (2000)
2. Connect the MAP sensor electrical connector.
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the intake manifold sight shield.
Tighten
Tighten the fasteners to 10 N.m (89 lb in).
2. Connect the MAP sensor electrical connector.
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the intake manifold sight shield.
Tighten
Tighten the fasteners to 10 N.m (89 lb in).