K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Accelerator Pedal Position Sensor: Description and Operation
Accelerator Pedal Position (APP) Sensor
Accelerator Pedal Position (APP) Sensor
The APP sensor is mounted on the accelerator pedal assembly. The APP is actually 3 individual accelerator pedal position sensors within one housing.
Three separate signal, ground, and 5.0 volt reference circuits are used to connect the APP and the TAC module. The APP sensor 1 voltage should
increase as the accelerator pedal is depressed, from below 1.0 volt at 0 percent pedal travel to above 2.0 volts at 100 percent pedal travel. APP sensor 2
voltage should decrease from above 4.0 volts at 0 percent pedal travel to below 2.9 volts at 100 percent pedal travel. APP sensor 3 voltage should
decrease from above 3.8 volts at 0 percent pedal travel to below 3.1 volts at 100 percent pedal travel.
