K 2500 Yukon 4WD V8-6.0L VIN U (2000)
2. Install the MAF-IAT sensor (4) on to the air cleaner housing (5).
3. Tighten the clamp securing the MAF-IAT (4) sensor to the air cleaner housing (5).
4. Connect the MAF-IAT electrical connector.
5. Install the air intake duct (2) to the MAF-IAT sensor and the throttle body.
6. Tighten the clamps (1,3) at the MAF-IAT sensor (4) and the throttle body.
