K 2500 Yukon 4WD V8-6.0L VIN U (2000)
2.
Connect the passenger side air bag yellow 2-way connector (1) to the vehicle harness yellow 2-way connector and install the CPA (2) under the
passenger seat.
3.
Connect the passenger side inflator module yellow 2-way connector (2) to the vehicle harness yellow 2-way connector. Install the CPA and
position the retaining clip into the cross-vehicle bar (4).
4.
Lift up on the IP compartment door. Depress the open stop while closing the door so that the door will stay in the proper position when open.
5.
Return the customer items to the P compartment and close the door.
6.
Connect the driver side inflator module yellow 2-way connector to the vehicle harness yellow 2-way connector and install the CPA under the
driver seat.
