K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Child Seat Tether Attachment: Service and Repair
Utility-4-Door With 2ND Folding Seat (AM7)
1. Position the child seat in the front seat right. Use GM P/N 15971501 in order to latch the tether to the buckle on the 2nd 40 percent seat if the seat
is unoccupied.
2. Position the child seat in the front seat center. Use 2nd seat center occupant lap belt latch plate if seat is unoccupied.
3. Position the child seat in the 2nd seat center. Use GM P/N 15989781 to the rear most set of cargo tie downs. Hook the top tether to the plate at the
center of the tether.
4. Position the child seat in the 2nd seat left. Use the left rear cargo tie down.
5. Position the child seat in the 2nd seat right. Use the right rear cargo tie down.
6. If all seats are occupied, then place the child seat in a rear seat position that will allow the use of the cargo tie downs.
