K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Seat Belt Buckle: Service and Repair
Seat Belt Buckle Replacement - Front
REMOVAL PROCEDURE
1. Remove the front seat belt buckle nut (1). Disconnect the electrical connection (2). The right seat buckle is shown, the left is similar.
2. Remove the seat belt buckle from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat belt buckle in the vehicle.
2. Connect the electrical connection (2).
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the front seat belt buckle nut (1).
Tighten
Tighten the nut to 53 N.m (39 lb ft).
