K 2500 Yukon 4WD V8-6.0L VIN U (2000)
7. Remove the upper anchor bolt.
8. Remove the retractor from the seat.
INSTALLATION PROCEDURE
1. Position the seat belt retractor onto the seat. Line up the tab on the retractor to the tab on the seat frame.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the upper anchor bolt.
Tighten
Tighten the bolt to 53 N.m (39 lb ft).
3. Install the retractor tower.
4. Install the retractor tower retaining screw.
