K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Starter Motor: Vehicle Damage Warnings
CAUTION: Before servicing any electrical component, the ignition key must be in the OFF or LOCK position and all electrical loads must be
OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live exposed electrical terminal,
also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury and/or damage to the vehicle or its
components.
NOTE:
-
Turn OFF the ignition when connecting or disconnecting the battery cables, the battery charger or the jumper cables. Failure to do so may damage
the PCM or other electronic components.
-
When charging side-terminal batteries with the battery cables connected, connect the charger to the positive cable bolt and to a ground located
away from the battery. When charging side-terminal batteries with the battery cables disconnected, install the battery side terminal adapters and
connect the charger to the adapters.
-
Do not connect the negative charger lead to the housings of other vehicle electrical accessories or equipment. The action of the battery charger
may damage such equipment.