K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Steering Damper: Service and Repair
-
Tools Required
-
J 6627-A Tie Rod Puller
-
J 29193 Steering Linkage Installer (12 mm)
Removal Procedure
1. Raise and support the vehicle on stands. Refer to Vehicle Lifting.
2. Remove the differential carrier shield. Refer to Shield Replacement.
Important: Use the proper tool in order to separate the ball stud.
3. Remove the steering damper ball stud nut (1). Do not reuse the nut.
4. Remove the steering damper ball stud from the relay rod using the J 6627-A.