K 2500 Yukon 4WD V8-6.0L VIN U (2000)
5. Install the 3-4 accumulator piston spring (1).
6. Install the checkball (1) into the valve body (2).
Use a small amount of J 36850 in order to keep the checkball in the valve body.
7. Install the J 25025-5 into the valve body.
8. Install the case gasket (3) and the valve body gasket (1) to the spacer plate (2). The case . gasket is identified by a C. The valve body gasket is
identified by a V.
9. Use the J 36850 in order to retain the gaskets (3) to the spacer plate (2).
10. Install the spacer plate and the gaskets to the transmission case.
Notice: Refer to Fastener Notice in Service Precautions.
11. Install the oil pass cover and the oil pass cover bolts.