K 2500 Yukon 4WD V8-6.0L VIN U (2000)
8. Remove the solenoid retainer bolt (7) and the solenoid retainer (6). Remove the pressure control solenoid (1).
9. Compress the actuator feed limit valve spring (3).
10. Remove the bore plug retainer (2) and release the spring slowly.
11. Remove the bore plug (5).
12. Remove the actuator feed limit valve spring (3) and the actuator feed limit valve (4).
13. Remove the solenoid retainer (4) and the 3-2 control solenoid (1).
14. Remove the 3-2 control valve (2) and the 3-2 control valve spring (3).
15. Remove the bore plug retainer (1) and the bore plug (8).
16. Remove the 3-2 downshift valve spring (2) and the 3-2 downshift valve (3).
17. Remove the coiled spring pin (4) and the bore plug (7).
18. Remove the reverse abuse valve spring (5) and the reverse abuse valve (6).
