K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Clutch Pedal Assembly: Service and Repair
Removal Procedure
1. Locate the clutch cylinder on the dash panel in the engine compartment.
2. Turn the clutch cylinder 45 degrees clockwise to unlock the clutch cylinder.
3. Remove the electrical connector from the clutch pedal position switch.
4. Pull the clutch cylinder from the clutch pedal.
^
Complete removal of the clutch cylinder from the dash panel is not required.
^
Ensure the clutch cylinder rod socket is disconnected from the clutch pedal.
