K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Shifter M/T: Service and Repair
NV 3500 Manual Transmission
Shift Lever
Removal Procedure
1. Remove four plastic retainer plugs securing the shift boot retainer to the shift boot.
2. Remove eight screws securing the shift boot and insulator to the floor panel.
3. Remove the retainer and shift boot from the shift lever.
4. Remove the shift lever from the shift tower. Do not remove the shift lever adjusting nut.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
