K 2500 Yukon 4WD V8-6.0L VIN U (2000)
Shifter Transfer Case: Service and Repair
Removal Procedure
1. Remove the shift rod from the shift control. Refer to Shift Lever Replacement - On Vehicle (Drivers shift Control Lever) or Shift Lever
Replacement - On Vehicle (Shift Linkage).
2. Remove the shift knob from the transfer case shift lever.
3. Remove three screws securing the shift control bezel from the shift control.
4. Remove four bolts securing the shift control to the floor panel and support bracket.
5. If required, remove the four screws securing the support bracket to the floor panel.
