K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
Front Door Panel: Service and Repair
Bezel Replacement
Door Handle Bezel Replacement
Door Handle Bezel Replacement
Removal Procedure
1. Insert a flat blade tool between the door inside bezel and the handle assembly.
2. Carefully pull outward the retaining clips while pulling out the bezel.
3. If the vehicle is equipped with power locks, disconnect the wiring connector.
Installation Procedure
1. If the vehicle is equipped with power locks, connect the wiring connector.
2. Snap the handle bezel into place in the door trim panel.
Door Handle Bezel Replacement (Inside Front)
REMOVAL PROCEDURE
