K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
1. Position the lower retainer to the trim panel.
2. Align the upper retainer clip to the door frame.
3. Install the upper extension by pressing into place until fully seated.
Upper Extension Trim Panel Replacement
Upper Extension Trim Panel Replacement
Tools Required
J 38778 Trim Panel Remover
Removal Procedure
1. Remove the trim panel from the door by completing the following steps:
1. Using the J 38778, carefully pry the retainer from the door.
2. Pull upward in order to release the extension from the trim panel.
2. Remover the retainer from the extension.
Installation Procedure
