K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
9. Drill through the hinge only at each punch location. Use a 13 mm (1/2 in) rotabroach hole saw or the equivalent (Fig. 4-60).
10. If necessary, use a chisel in order to separate the hinge from the pillar (Fig. 4-61).
11. Remove the hinge.
12. Remove all of the remaining weld from the pillar surface in order to ensure a flush fit of the service hinge (Fig. 4-62).
INSTALLATION PROCEDURE