K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the three wheelhouse to radiator support bolts (4) and the nuts (5).
Tighten the wheelhouse to radiator support bolts to 25 N.m (18 lb ft).
3. Install the two wheelhouse-to-cowl mounting bracket bolts.
Tighten the wheelhouse to the cowl bolts to 25 N.m (18 lb ft).
4. Install the fender to the wheelhouse bolts and the wheelhouse nuts.
Tighten the fender to the wheelhouse bolts to 25 N.m (18 lb ft).
5. Install the right front wheel.
6. Lower the vehicle.
7. Install the air conditioning evaporator tube into the clip.
8. Install the air cleaner hose bracket to the wheelhouse.
9. Install the heater hoses into the clip.
10. Install the battery tray.
11. Install the battery.
12. Connect the battery cables.
