K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
6. Unsnap the grille end from the fender. Remove the grille from the vehicle.
Installation Procedure
1. Snap the grille ends into the fender.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screw holding the grille to the latch support.
Tighten the grille screw to 9 N.m (75 lb in).
3. Using a Phillips screwdriver, rotate the grille retainer 1/4 turn clockwise.
