K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
1. Remove the upper windshield trim.
2. Remove the roof side door trim.
3. Remove the garnish molding upper trim (1).
Installation Procedure
1. Install the garnish molding upper trim (1).
2. Install the roof side door trim.
3. Install the upper windshield trim.
Rear Quarter Lower Trim Panel Replacement
Rear Quarter Lower Trim Panel Replacement
Removal Procedure
1. Remove the pocket from the lower panel, if equipped.
2. Remove the lower panel screws.
3. Remove the lower rear quarter trim panel from the vehicle.
Installation Procedure