K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
8. Install the seat to the vehicle.
Seat Cushion Trim Cover and Pad Replacement (Split Bench)
Seat Cushion Trim Cover and Pad Replacement (Split Bench)
Removal Procedure
1. Remove the recliner handle.
2. Remove the power seat adjuster switch, if equipped.
3. Release the seat cushion cover retainers (24) from the seat frame (3).
4. Release the hook and loop strips retaining the seat cushion cover (1) to the seat cushion foam pad (2).
5. Remove the seat cushion cover (1) from the foam pad (2).
Installation Procedure
