K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
1. If equipped with the 2 point pipe, install the coolant air bleed hose (2) to the pipe (1).
2. Position the hose clamp at the pipe.
3. If equipped with the 4 point pipe, install the coolant air bleed hose (2) from the pipe (1).
4. Position the hose clamp at the pipe.
5. Install the coolant air bleed hose to the throttle body.
6. Position the coolant air bleed hose clamp at the throttle body.
7. Install the generator.
8. If necessary, install the engine sight shield.
9. Add engine coolant, if necessary.
