K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
1. Install the discharge hose (1) to the vehicle.
2. Connect the A/C recirculation switch to the discharge hose.
3. Connect the discharge hose to the condenser using new sealing washers.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the nut to the condenser.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
5. Install the upper baffle. Refer to Radiator Air Baffle Assemblies and Deflectors (Side) or Radiator Air Baffle Assemblies and Deflectors (Upper)
in Cooling System.
