K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
7.1.
Remove the console (A) together with the OnStar(R) control modules.
7.2.
Remove the connectors (B).
Important:
The optic cable must not be bent with a radius less than 25 mm (1 in).
Important:
Secure the wiring harness so that there is no risk of chafing and rattling.
7.3.
Fold back the wiring harness and tape over the connectors (C). Fold back the wiring harness once more and secure with cable ties (D).
7.4.
Fit the parcel shelf trim in accordance with WIS - 8. Body - Interior equipment - Adjustment/Replacement.
8.
CV: Removing the OnStar(R) control modules and securing the wiring: Adjustment/Replacement.
8.1.
Open the luggage compartment floor.