K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
7.2.
Remove the console (A).
7.3.
Disconnect the connector (B) from the OnStar(R) control module.
Important:
Secure the cable harness to prevent the risk of scraping and rattling.
7.4.
Fold back the cable harness and tape down the connector (C). Fold back the cable harness again and secure with cable ties (D).
7.5.
5D: Assemble the right-hand cover for the luggage compartment floor.
8.
Fit the ground cable on the battery's negative cable.
