K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
Negative: Service and Repair
Battery Negative Cable Replacement - Auxiliary
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the auxiliary negative battery cable.
2. Remove the auxiliary battery cable clips from the studs at the front of dash.
3. Remove the engine sight shield.
4. Remove the engine wiring harness/auxiliary negative battery cable bolt.
5. Remove the auxiliary negative battery cable.
INSTALLATION PROCEDURE
IMPORTANT: Install the engine wiring harness ground terminal on top of and inboard of the auxiliary negative battery cable ground crimp.