K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
7. Install the J 29193 or the J 29194.
-
Tighten the J 29193 or the J 29194 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
8. Remove the J29193 or the J29194.
9. Install the new relay rod prevailing torque nut.
-
Tighten the new prevailing torque nut to 62 Nm (46 ft. lbs.).
10. Install the engine protection shield, if equipped. Refer to Engine Protection Shield Replacement in Body and Frame.
11. Lower the vehicle.
12. Check the wheel alignment. Refer to Measuring Wheel Alignment.