K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
-
Tighten the steering linkage installer to 54 Nm (40 ft. lbs.).
5. Remove the J29193.
6. Install the prevailing torque nuts.
-
Tighten the mounting nut to 40 Nm (30 ft. lbs.).
-
Tighten the ball stud nut to 62 Nm (46 ft. lbs.).
7. Install the engine protection shield, if equipped. Refer to Engine Protection Shield Replacement in Body and Frame.
8. Lower the vehicle.
