K 2500 Yukon XL 4WD V8-8.1L VIN G (2001)
Front Door Window Regulator: Service and Repair
Front Door Module Replacement
Front Door Module Replacement
Removal Procedure
1. Lower the window.
2. Remove the trim panel.
3. Remove the water deflector.
4. Carefully pry out the retainer clips in order to remove the speaker, as necessary.
5. Remove the inner panel bolts.
6. Remove the lock rods from the following components:
*
The lock handle
*
The lock lever
*
The lock rod guides
7. Disconnect the wiring harness.
8. Slide the inner mounting panel rearward in order to release the regulator roller from the window sash.
Remove the inner mounting panel.
Installation Procedure