K 3500 Truck 4WD V8-393 6.5L DSL Turbo (1993)
Pitman Arm: Service and Repair
With I-Beam Front Axle (C3HD Models)
I-BEAM FRONT AXLE (C3HD MODELS)
IMPORTANT: Use the proper tool to separate all ball joints.
Steering Linkage (K-Models)
REMOVE OR DISCONNECT
TOOLS REQUIRED:
^
J 24319-01 Steering Linkage Puller.
^
J 29107 Pitman Arm Puller.
^
J 6632-01 Pitman Arm Remover.
^ Raise the vehicle. Support the vehicle with jack stands.
1. Drag link (31) from pitman arm ball stud.
2. Pitman arm nut (38) from steering gear shaft. (Do not reuse nut).
