K 3500 Truck 4WD V8-393 6.5L DSL Turbo (1993)
could destroy root cause analysis.
Cooler Flushing: Cooler flushing and a flow check must be performed whenever a transmission is removed for service. It is imperative to flush the
cooler prior to a SRTA installation, or when fluid contamination is suspected. Use Kent-Moore tool J 35944 and solvent J 35944-20 to flush the
cooler. Instructions are published in each service manual on-vehicle service section.
6.
Determine if the motorhome has either air bags or a tag axle installed as after-market rear suspension components. Air bags are installed between
the axle and the frame and tag axles are installed behind the drive axle.
7.
Determine the model designation (this may be determined through the service parts identification label or the Vehicle Identification Number), the
wheelbase and the weld to weld (Figure 2 - Dimension T) prop shaft lengths (in inches) of the motorhome.
8.
With the above information, determine if the vehicle matches a description listed in Table A.
