K 3500 Truck 4WD V8-393 6.5L DSL Turbo VIN S (1995)
Piston: Service and Repair
Pistons & Rods Assemble
Piston & Piston Ring End Gap Orientation
Assemble piston to rod and install into cylinder block. Install with depression on top of piston toward outside of engine, Fig. 9. Install connecting rod
bearing with tang slots positioned on side opposite camshaft.
Pistons are available in standard sizes and oversize of 0.030 inch. Rings are available in standard sizes and oversize of 0.030 inch. When installing piston
rings, stagger piston rings as shown in Fig. 9.
