K 3500 Truck 4WD V8-393 6.5L DSL Turbo VIN S (1995)
![background image](/gmc/k_3500_truck_4wd/v8-393_6.5l_dsl_turbo_vin_s/Page-1799003.png)
Painting Process
System: Dupont Products
Paint Color Information: Corsican Silver WA EQ9283 Dupont # C9143, Sparkle Silver WA9967 Dupont # C9339
1.
Wipe wheel with cleaning solvent: 3939-S, 3949-S or 3900-S.
2.
Mask off tires.
Important:
3.
Mask off all wheel mounting surfaces and wheel mount surfaces.
4.
Apply two coats of 615/616-S etching primer to wheel allowing 10 minutes flash between coats. Allow to dry for 30 minutes before applying
primer coat.
5.
Apply URO 5000 primer 1220/193-S + accelerator 389-S using two coats at 65-70 PSI at the gun. Allow 12-15 minutes between coats. Force bake
30 minutes at 140°F (60°C).
6.
Scuff sand using green Scotch-Brite pad.
7.
Solvent wipe before top coating.
8.
Apply IMRON 6000 base coat to wheel. 2-3 coats to hiding at 60-70 PSI allowing to flash between coats. Base coat needs to dry 20-30 minutes
before clearcoat is applied.
9.
Apply 3440-S clearcoat to wheel using two coats at 60-70 PSI. Flash 10-15 minutes between coats. 389-S can be used in basecoat and clearcoat to
give faster set up times.
10.
Allow overnight dry before reassemble. Can be baked for 30 minutes at 140°F (60°C).
Attachment 2 - PPG Products
Painting Process: PPG System
Paint Color Information: Corsican Silver WAEQ9283; PPG # DBC-3531, Sparkle Silver WA9967; PPG # 35367
1.
Wash entire wheel with aluminum cleaner DX533, mix 1:3 with water. Allow to react 2-3 minutes and rinse thoroughly.
2.
Wash entire wheel with aluminum conditioner DX5O3 straight from the container. Allow to react 2-3 minutes until pale gold or tan color
develops. Rinse thoroughly and dry.
3.
Mask off tires.
Important:
4.
Mask off all wheel nut mounting surfaces and wheel mounting surfaces.
5.
Apply 1-2 coats of DP Primer and allow to flash for 15-20 minutes.
6.
Apply 2-3 coats of Deltron Basecoat (DBC) and allow to flash 20 minutes after the final coat.
7.
Apply two (2) wet coats of Concept 2001 Acrylic urethane.
8.
Flash 20 minutes and bake 140°F (60°C) for 30 minutes.
For more information contact your PPG Jobber.
Attachment 3 - Spies Hecker
Painting Process: Spies Hecker System
Paint Color Information: Corsican Silver AWEQ9283; SH-72913, Sparkle Silver WA9967; SH-71912
1.
Clean with Permahyd Silicone Remover 7090.
2.
Mask off tires.