K 3500 Truck 4WD V8-454 7.4L VIN N TBI (1995)
-
If replacing hose, remove retainer from hose and reinsert in connector.
-
If reusing hose and connector, retainer can remain in place on hose.
Install or Connect
1. Push hose into connector until retainer tabs lock. Pull back on hose to check for proper engagement.
2. Inlet hose to heater core.
3. Inlet hose clamp.
4. Inlet hose mounting screw. Tighten screw to 1.4 Nm (12 lbs. in.).
5. Engine coolant.
6. Air cleaner.
-
Check the system for leaks.
