K 3500 Truck 4WD V8-5.7L VIN R (1998)
Console: Service and Repair
Courtesy Lamp Removal
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable(s).
2. Remove the lamp assembly by completing the following steps:
2.1. Push upward against the reading lamp assembly.
2.2. Turn the reading lamp assembly counterclockwise.
2.3. Lower the assembly from the console.
3. Remove the bulb and base assembly from the back of the assembly.
4. Remove the bulb from the base by pulling the bulb straight out of the base.
INSTALLATION PROCEDURE
1. Install the bulb into the base by pushing the bulb straight into the base.
2. Install the bulb and base assembly into the lens and socket assembly.
3. Install the lamp assembly into the console by pushing the lamp assembly into the console.
4. Turn the lamp assembly clockwise.
5. Connect the negative battery cable(s).
