K 3500 Truck 4WD V8-5.7L VIN R (1998)
6. Remove the mounting bolt seals.
7. Remove the bushings.
8. Inspect the mounting bolts, the key, the spring, and the sleeves for any corrosion. Do not attempt to polish away any corrosion. Replace any
corroded parts.
9. Inspect the bolt boots for any nicks, cuts, or corrosion. Replace any corroded parts.
Important: Clean the caliper assembly.
Install a new brake hardware kit any time it is necessary to remove it from the rotor.
INSTALLATION PROCEDURE
1. Lubricate the bushings and the mounting bolt seals with Delco Silicone Lube or the equivalent.
2. Install the new bushings.
