K 3500 Truck 4WD V8-5.7L VIN R (1998)
Parking Brake Shoe: Service and Repair
REMOVAL PROCEDURE
1. Remove the drum.
2. Remove the bolts.
3. Remove the washers.
4. Disconnect the support plate and the shoe kits.
5. Remove the springs.
6. Remove the shoe kits.
7. Inspect the springs for signs of wear or excessive heat. Replace as needed.
8. Inspect the support plate friction points for wear. Replace if wear is excessive.
INSTALLATION PROCEDURE
1. Connect the shoe kits to the support plate.
2. Connect the springs.
3. Install the support plate.
4. Install the shoe kits.
