K 3500 Truck 4WD V8-5.7L VIN R (1998)
Description
1. Install the buckle assembly to the floor panel stud.
2. Install the nuts to the buckle assembly.
Tighten
^
Tighten the nuts to 42 N.m (31 lb ft).
NOTICE: Refer to Fastener Notice in Service Precautions.
Description
3. Install the bolt through the seat belt retractor to the weld nut.
Tighten
^
Tighten the bolt to 55 N.m (41 lb ft).
4. Install the quarter trim panel. Refer to Quarter Panel Trim Replacement in Interior Trim.
5. Install the bolt to the upper anchor plate.
Tighten
^
Tighten the bolt to 55 N.m (41 lb ft).
6. Install the rear seat. Refer to Rear Seat Replacement.
