K 3500 Truck 4WD V8-5.7L VIN R (1998)
12. Make sure that the steering column transmission shift lever is in Park (P).
13. Raise the vehicle. Support the vehicle with safety stands. Refer to General Vehicle Lifting in General Information.
14. Route the range select lever cable under the fuel lines.
15. Connect the range select lever cable to the rear transmission bracket.
16. Install the range select lever cable retainer to the transmission cable bracket.
17. Remove the black shipping clip from the new range select lever cable. Discard the clip.
18. Install the range select lever cable end to the transmission range select lever. Push the cable end onto the transmission range select lever stud ball.
19. Adjust the range select lever cable. Refer to Shift Cable Adjustment.
